MAXTRAX Mounting Pin Set X-Series
DESCRIPTION
Securely mount your MAXTRAX XTREME on your roof rack bars! The set includes 4 pins which can securely hold 2 or 4 MAXTRAX XTREME, 4 stainless steel Nylock nuts and 4 flat stainless steel washers.
Designed to secure 2 or 4 (1 or 2 pairs) of MAXTRAX X-SERIES 4WD Recovery Tracks
Glass-filled Nylon and stainless steel quick-release pins for securely mounting your MAXTRAX on a roof rack, mount, or crossbars. The set includes 4 pins to securely hold 2 or 4 MAXTRAX X-SERIES 4WD recovery tracks, 4 stainless-steel Nyloc nuts, and 4 flat stainless-steel washers. There's a hole in the top of each mounting pin to fit a small padlock.
* Designed specifically for MAXTRAX X-SERIES 4WD Recovery Tracks (NOT INCLUDED).
Mounting Instructions:
Here are the layout dimensions.
Please note: Manufacturing tolerances may affect the dimensions shown above, so please check these measurements against your MAXTRAX Recovery Tracks before drilling. Measure twice. Cut once.
Each MAXTRAX Mounting Pin Set includes 4 Nylon and stainless-steel quick-release Mounting Pins (which can securely hold 2 or 4 MAXTRAX Recovery Tracks), 4 stainless-steel Nyloc nuts and 4 flat stainless-steel washers. You’ll notice that there's a hole in the top of each mounting pin to allow for a padlock.
Please follow these Instructions closely to reduce the risk of personal injury or property damage when installing and using this product on your vehicle.
All 4 Mounting Pins MUST be used for securing your MAXTRAX Recovery Tracks.
When installing the Mounting Pins ensure that the knuckles are aligned so that they’re in the same orientation as the keyholes in the MAXTRAX Recovery Tracks.
.jpg)
The padlock hole through the shaft should not be visible when you are installing the Mounting Pins. It should only appear once the knuckle has been turned 90º to lock down your MAXTRAX.
Apply lubricant to the stainless-steel threads prior to tightening the nuts and tighten using hand tools only; DO NOT tighten with power tools as this can generate sufficient heat to cause the Nyloc nut to bind to the thread prematurely.
Once the Mounting Pins are installed it’s easy to mount your MAXTRAX Recovery Tracks.
- Secure 2 MAXTRAX Recovery Tracks by turning both knuckles on each pin 90º.
- Secure 4 MAXTRAX Recovery Tracks by turning the top knuckle on each pin 90º.
We strongly recommend fitting padlocks through a couple of the most easily accessible Mounting Pin/s to reduce the risk of theft of your MAXTRAX Recovery Tracks, and also to prevent the knuckle/s from unintentionally rotating whilst driving.
.jpg)
We also strongly recommend that before driving, and regularly during your journey, particularly on rough roads and tracks, you should check that the Mounting Pins and the MAXTRAX Recovery Tracks are secure.
The knuckles can sometimes become difficult to turn if they haven’t been used for a while as the assembly may gradually become filled with road dust and grime. Rinsing with water or spraying with a water-dispersant compound may help.
SHIPPING
DELIVERY TIMES
All the following estimates are in business days. If you haven’t received your order within 10 days then please give us a call at 03 8401 3776 or contact us via email at sales@trekhardware.com.au with your order number in the message.
| Standard | Express | Bulky Items | |
| VIC - Metro | 3 - 5 | 2 - 3 | 3 - 5 |
| VIC - Regional | 6 - 8 | 3 - 5 | 8 -10 |
| ACT - Metro | 3 - 5 | 2 - 3 | 3 - 5 |
| ACT - Regional | 6 - 8 | 3 - 5 | 8 -10 |
| NSW - Metro | 4 - 6 | 3 - 4 | 4 - 6 |
| NSW - Regional | 7 - 9 | 4 - 6 | 9 - 11 |
| SA - Metro | 5 - 7 | 4 - 5 | 5 - 7 |
| SA - Regional | 8 - 10 | 5 - 7 | 10 - 12 |
| WA - Metro | 7 - 9 | 5 - 7 | 8 - 10 |
| WA - Regional | 10 - 12 | 7 - 9 | 12 - 14 |
| QLD - Metro | 6 - 8 | 4 - 6 | 7 - 9 |
| QLD - Regional | 9 - 11 | 6 - 8 | 11 - 13 |
| NT - Metro | 7 - 9 | 5 - 7 | 8 - 10 |
| NT - Regional | 10 - 12 | 7 - 9 | 12 - 14 |
| TAS - Metro | 6 - 8 | 4 - 6 | 7 - 9 |
| TAS - Regional | 9 - 11 | 6 - 8 | 11 - 13 |
DELIVERY FEE
Your delivery cost will vary depending on the size, weight and delivery location. You can check the delivery cost once you add products to the cart.
DELIVERY ACCEPTANCE
All deliveries are registered and require a signature upon delivery. If there's no one at home, a card will be left with instructions to collect your order. Non bulky items can be delivered to the PO Box.
BULKY ITEMS: Once the product has reached the nearest depot from the delivery address, the delivery company will contact you via the contact number you have provided at checkout to arrange a suitable time for delivery. If no one is home at the time of delivery, a second attempt will be made to deliver the item free of charge before you need to pick up the item yourself from the depot (a card will be left with the details of the depot).
SPLIT CONSIGNMENT / DELIVERIES
On occasions, an order may contain multiple items which may need to be delivered by multiple courier companies. Hence the products may arrive at different times.
SHIPPING DELAYS
There could be delays in delivery from time to time due to the following reasons:
- Public holidays
- Incorrect shipping address.
- Pandemic like situations where the supply chain is affected due to staff shortages at courier companies
- If the payment capture process is unsuccessful your order will be delayed until alternate payment arrangements can be made.
- Occasionally if a particular product is in high demand we may need to re-order the product from our suppliers.
RETURNS
There may be occasions when you will need to return your products. We have designed our returns policy to make this process very simple.
All goods purchased from Trek Hardware come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
We offer replacement / repair / store credit / refund if the product is faulty such as:
- Major failure of a product
- The product you received doesn’t match what was described to you
- Don’t do what they are supposed to do
You must provide us with the proof of purchase (e.g. your Trek Hardware purchase receipt, online tax invoice, credit card or bank statements). Any refund will be provided via the same method of payment as the original purchase.
CHANGE OF MIND RETURNS
Any product purchased from Trek Hardware can be returned within 14 days from the time it was received. For change of mind returns, the product:
- must be in its original condition.
- must be unused.
- must have all the tags still attached to it (if any).
Buyer has to cover the cost of return postage for all change of mind returns. The return will only get processed once Trek Hardware has received and inspected the product. The delivery fee is non-refundable for change of mind returns. For change of mind returns, Trek Hardware will not be responsible if the item gets lost in transit during the return shipping.
EXCEPTIONS:
Following items are excluded from the change of mind returns:
- Sleeping Bags.
- Special Orders.
- Workshop assembled items if Trek Hardware was given the wrong measurements.
RETURNS BY POST
If you decide to return the product contact us at 03 8401 3776 or via email at sales@trekhardware.com.au . We will send you a return label which can be used to send the product back to us.
For change of mind returns, Trek Hardware will not be responsible if the item gets lost in transit during the return shipping.
RETURNS IN PERSON
Products can only be returned at the store they were purchased from.
PROOF OF PURCAHSE
All returns and exchanges require a proof of purchase (e.g. Trek Hardware receipt, credit card / bank statement)
PRODUCT WARRANTIES
All products sold by Trek Hardware have varying warranty periods. The warranty period, provisions and the company providing the warranty will be specified on or inside the product packaging. Please refer to the product manual and warranty documents to determine the terms and conditions of any additional warranty.
Download the Warranty form here
Securely mount your MAXTRAX XTREME on your roof rack bars! The set includes 4 pins which can securely hold 2 or 4 MAXTRAX XTREME, 4 stainless steel Nylock nuts and 4 flat stainless steel washers.
Designed to secure 2 or 4 (1 or 2 pairs) of MAXTRAX X-SERIES 4WD Recovery Tracks
Glass-filled Nylon and stainless steel quick-release pins for securely mounting your MAXTRAX on a roof rack, mount, or crossbars. The set includes 4 pins to securely hold 2 or 4 MAXTRAX X-SERIES 4WD recovery tracks, 4 stainless-steel Nyloc nuts, and 4 flat stainless-steel washers. There's a hole in the top of each mounting pin to fit a small padlock.
* Designed specifically for MAXTRAX X-SERIES 4WD Recovery Tracks (NOT INCLUDED).
Mounting Instructions:
Here are the layout dimensions.
Please note: Manufacturing tolerances may affect the dimensions shown above, so please check these measurements against your MAXTRAX Recovery Tracks before drilling. Measure twice. Cut once.
Each MAXTRAX Mounting Pin Set includes 4 Nylon and stainless-steel quick-release Mounting Pins (which can securely hold 2 or 4 MAXTRAX Recovery Tracks), 4 stainless-steel Nyloc nuts and 4 flat stainless-steel washers. You’ll notice that there's a hole in the top of each mounting pin to allow for a padlock.
Please follow these Instructions closely to reduce the risk of personal injury or property damage when installing and using this product on your vehicle.
All 4 Mounting Pins MUST be used for securing your MAXTRAX Recovery Tracks.
When installing the Mounting Pins ensure that the knuckles are aligned so that they’re in the same orientation as the keyholes in the MAXTRAX Recovery Tracks.
The padlock hole through the shaft should not be visible when you are installing the Mounting Pins. It should only appear once the knuckle has been turned 90º to lock down your MAXTRAX.
Apply lubricant to the stainless-steel threads prior to tightening the nuts and tighten using hand tools only; DO NOT tighten with power tools as this can generate sufficient heat to cause the Nyloc nut to bind to the thread prematurely.
Once the Mounting Pins are installed it’s easy to mount your MAXTRAX Recovery Tracks.
- Secure 2 MAXTRAX Recovery Tracks by turning both knuckles on each pin 90º.
- Secure 4 MAXTRAX Recovery Tracks by turning the top knuckle on each pin 90º.
We strongly recommend fitting padlocks through a couple of the most easily accessible Mounting Pin/s to reduce the risk of theft of your MAXTRAX Recovery Tracks, and also to prevent the knuckle/s from unintentionally rotating whilst driving.
We also strongly recommend that before driving, and regularly during your journey, particularly on rough roads and tracks, you should check that the Mounting Pins and the MAXTRAX Recovery Tracks are secure.
The knuckles can sometimes become difficult to turn if they haven’t been used for a while as the assembly may gradually become filled with road dust and grime. Rinsing with water or spraying with a water-dispersant compound may help.
DELIVERY TIMES
All the following estimates are in business days. If you haven’t received your order within 10 days then please give us a call at 03 8401 3776 or contact us via email at sales@trekhardware.com.au with your order number in the message.
| Standard | Express | Bulky Items | |
| VIC - Metro | 3 - 5 | 2 - 3 | 3 - 5 |
| VIC - Regional | 6 - 8 | 3 - 5 | 8 -10 |
| ACT - Metro | 3 - 5 | 2 - 3 | 3 - 5 |
| ACT - Regional | 6 - 8 | 3 - 5 | 8 -10 |
| NSW - Metro | 4 - 6 | 3 - 4 | 4 - 6 |
| NSW - Regional | 7 - 9 | 4 - 6 | 9 - 11 |
| SA - Metro | 5 - 7 | 4 - 5 | 5 - 7 |
| SA - Regional | 8 - 10 | 5 - 7 | 10 - 12 |
| WA - Metro | 7 - 9 | 5 - 7 | 8 - 10 |
| WA - Regional | 10 - 12 | 7 - 9 | 12 - 14 |
| QLD - Metro | 6 - 8 | 4 - 6 | 7 - 9 |
| QLD - Regional | 9 - 11 | 6 - 8 | 11 - 13 |
| NT - Metro | 7 - 9 | 5 - 7 | 8 - 10 |
| NT - Regional | 10 - 12 | 7 - 9 | 12 - 14 |
| TAS - Metro | 6 - 8 | 4 - 6 | 7 - 9 |
| TAS - Regional | 9 - 11 | 6 - 8 | 11 - 13 |
DELIVERY FEE
Your delivery cost will vary depending on the size, weight and delivery location. You can check the delivery cost once you add products to the cart.
DELIVERY ACCEPTANCE
All deliveries are registered and require a signature upon delivery. If there's no one at home, a card will be left with instructions to collect your order. Non bulky items can be delivered to the PO Box.
BULKY ITEMS: Once the product has reached the nearest depot from the delivery address, the delivery company will contact you via the contact number you have provided at checkout to arrange a suitable time for delivery. If no one is home at the time of delivery, a second attempt will be made to deliver the item free of charge before you need to pick up the item yourself from the depot (a card will be left with the details of the depot).
SPLIT CONSIGNMENT / DELIVERIES
On occasions, an order may contain multiple items which may need to be delivered by multiple courier companies. Hence the products may arrive at different times.
SHIPPING DELAYS
There could be delays in delivery from time to time due to the following reasons:
- Public holidays
- Incorrect shipping address.
- Pandemic like situations where the supply chain is affected due to staff shortages at courier companies
- If the payment capture process is unsuccessful your order will be delayed until alternate payment arrangements can be made.
- Occasionally if a particular product is in high demand we may need to re-order the product from our suppliers.
There may be occasions when you will need to return your products. We have designed our returns policy to make this process very simple.
All goods purchased from Trek Hardware come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
We offer replacement / repair / store credit / refund if the product is faulty such as:
- Major failure of a product
- The product you received doesn’t match what was described to you
- Don’t do what they are supposed to do
You must provide us with the proof of purchase (e.g. your Trek Hardware purchase receipt, online tax invoice, credit card or bank statements). Any refund will be provided via the same method of payment as the original purchase.
CHANGE OF MIND RETURNS
Any product purchased from Trek Hardware can be returned within 14 days from the time it was received. For change of mind returns, the product:
- must be in its original condition.
- must be unused.
- must have all the tags still attached to it (if any).
Buyer has to cover the cost of return postage for all change of mind returns. The return will only get processed once Trek Hardware has received and inspected the product. The delivery fee is non-refundable for change of mind returns. For change of mind returns, Trek Hardware will not be responsible if the item gets lost in transit during the return shipping.
EXCEPTIONS:
Following items are excluded from the change of mind returns:
- Sleeping Bags.
- Special Orders.
- Workshop assembled items if Trek Hardware was given the wrong measurements.
RETURNS BY POST
If you decide to return the product contact us at 03 8401 3776 or via email at sales@trekhardware.com.au . We will send you a return label which can be used to send the product back to us.
For change of mind returns, Trek Hardware will not be responsible if the item gets lost in transit during the return shipping.
RETURNS IN PERSON
Products can only be returned at the store they were purchased from.
PROOF OF PURCAHSE
All returns and exchanges require a proof of purchase (e.g. Trek Hardware receipt, credit card / bank statement)
PRODUCT WARRANTIES
All products sold by Trek Hardware have varying warranty periods. The warranty period, provisions and the company providing the warranty will be specified on or inside the product packaging. Please refer to the product manual and warranty documents to determine the terms and conditions of any additional warranty.
Download the Warranty form here
This product has no reviews yet.
You may also like
